WHAT IS VENEER PLYWOOD? APPLICATION IN PRODUCING PLYWOOD

Veneer is the main input material of plywood production. The quality of the plywood depends on the quality of the veneer. In this article, Happyco will tell you the general information about veneer plywood.

What is Veneer Plywood?

Veneer Plywood

Contact>>>Here

Veneer Plywood refers to thin slices of natural wood obtained through the use of a peeling machine. There are two types of veneer: core veneer and face veneer. The main distinction between core veneer and face veneer lies in their thickness and wood species. Core veneer is typically made from species like Acacia, Eucalyptus, Poplar, Rubber, Pine, with a thickness ranging from 1.7 to 2mm. Both sides of the core veneer have a rough texture. On the other hand, face veneer is crafted from special woods such as Birch, Oak, Maple, and is much thinner than core veneer, measuring around 0.25-0.3mm. The surface of face veneer is sanded meticulously, resulting in a visible wood grain pattern.

In Vietnam, many manufacturers specialize in producing core veneer due to the abundance of Acacia, Eucalyptus, and Rubber trees.

Technical Specifications for Core Veneer Plywood: 

- Thickness: Optional, ranging from 1.7mm to 2mm
- Wood Types: Eucalyptus, Acacia, Poplar, Birch, Rubber, and more
- Moisture Content: Under 20% (dried) or under 14% (kiln-dried)
- Quality Grades: A, B, C

Veneer Plywood grade A:

                                                                                                        Veneer Plywood grade A
Contact>>>Here

- No holes larger than 3 cm in diameter
- No defects on the side
- Tear at the head should not exceed 35 cm
- No roughness or mold present

Veneer Plywood Grade B:

                                                                                                 Veneer Plywood Grade B
Contact>>>Here

- Limited presence of living eyes and deadeye
- May contain large holes and lacerations
- Patching is permissible

Veneer Plywood Grade C:

                                                                                                  Veneer Plywood Grade C
Contact>>>Here

- Unlimited number of living eyes and deadeye
- Large holes and lacerations are acceptable
- Other defects may be present

Plywood is manufactured using multiple layers of veneer. The dried veneer is bonded together with specialized glue and stacked, forming plywood with a minimum of three layers. Various types of plywood are produced, including film-faced plywood, commercial plywood, LVL plywood, packing plywood, and birch plywood.

To ensure a reliable source of materials for the market and sufficient supply for production and export, Happyco owns a veneer factory that specializes in producing eucalyptus and acacia veneer with various thicknesses ranging from 1.7mm to 2mm. With advanced techniques, experience, and modern machinery, Happyco is renowned as the best in Vietnam and enjoys a reputation in international markets such as Taiwan, China, and India.

Happyco supplies a significant volume of eucalyptus and acacia veneer to Vietnam's plywood manufacturers. Every month, we can provide a supply of 2000m3, contributing to the stability of the Vietnam plywood supply chain. When you purchase plywood from Happyco, you can rest assured that it is crafted from carefully selected veneer of high quality, meeting all the requirements for producing top-grade plywood.